WEET ​SOD-123FL 1A1 THRU 1A7 General Purpose Plastic Rectifier

Author: admin　Publish: 2018/10/17　Category: General Rectifier Diodes　Read: Times　Comments

WEE Technology Company Limited

Manufacturer of Surface Mount (SMD) and Through Hole (DIP) Diodes & Rectifiers

SMD Type SOD-123FL 1A1 THRU 1A7 (1A1, 1A2, 1A3, 1A4, 1A5, 1A6, 1A7) General Purpose Plastic Rectifier

Typical Features and Characteristic

Glass passivated chip

Low leakage current

High forward surge capability

Maximum Average Forward Rectified Current I(AV): 0.8Amps

Package: Tape and Reel

WEE Technology specially recommends SOD-123FL small package diode, which has the following advantages:

1, This product adopts the new packaging technology of high power, small package and full frame.

2, The occupied area is 46% less than SMA, 65% less than SMB, 85% less than SMC, the product height is 45% lower than SMA, 50% lower than SMB and 50% lower than SMC.

3, In terms of product miniaturization, it has a very wide market expectation. 

4, It is the preferred product to replace traditional devices such as 1N4007, M7, GS1M and 1A7 and so on.

Please more details by below link, thank you.

http://www.weetcl.com/General_Purpose_Rectifiers/SOD123FL_A1_THRU_A7.html

« 上一篇下一篇 » Original Article From WEE Technology！Tags: WEET 1A7  WEET SOD-123FL