Welcome: Homepage / Bridge Rectifiers / Artical

WEET 1.0 AMPS. 1000V MB1F To MB10F Ultra Miniature Glass Passivated Single Phase Bridge Rectifiers

Author: admin Publish: 2018/12/13 Category: Bridge Rectifiers Read: Times Comments

WEE Technology Company Limited
Manufacturer of Surface Mount (SMD) and Through Hole (DIP) Diodes & Rectifier


WEET 1.0 AMPS. 1000V MB1F THRU MB10F (MB1F, MB2F, MB3F, MB4F, MB6F, MB8F, MB10F) Ultra Miniature Glass Passivated Single-Phase Bridge Rectifiers

SOP-4 SMT Packaging MBF


WEET Rectifier bridges manufactured by GPP chips are generally embodied in resisting current and voltage surge impact, discreteness, parameter consistency, energy consumption differences and so on.

It has the advantages of high surge resistance, 100 times current and voltage at the instant of start-up, stable operation, no heat and no explosion.

The foot spacing of WEET rectifier bridge MB10F model is 2.5mm, the whole length is 4.7mm, the height is 1.5mm, the thickness is 0.6mm, the body width is 4.0mm, the foot thickness is 0.25mm. The forward current (Io) is 0.5A, the reverse voltage is 1000V, and the forward voltage (VF) is 1.0V. The GPP chip is made of 4 chips. The chip size is 46MIL. Its surge current is 35A, the leakage current (Ir) is 5uA, the working temperature is -55-150 C, and the recovery time is 500ns.

Rectifier Bridge Reactor MB10F is mainly used in the field of low current products: low power switching power supply, charger, power adapter, LED lamp rectifier and other related electrical products.

Typical Application market: mobile phone charger, LED lamps, etc.


« 上一篇下一篇 » Original Article From WEE Technology!Tags: WEET MB10F  WEET Miniature Diodes  

Comment:

WEET Calender
WEET Products Catalog
WEET Previous
WEET Control Panel